NSF approved Water washable fluorescent penetrant Penetrant Type I Sensitivity level 1 acc. EN ISO3452:2 Crack indication yellow fluorescent (UV) Suitable for all metals (suitability for plastics and ceramics must be checked before use) Carrier medium - glyceride
MR®81 is a FOOD GRADE, NSF certified non-combustible, light, free flowing dry developer powder that is ideal for highly sensitive fluorescent penetrant processes for food application which can be applied to oven-dried parts following the use of penetrants and forms a thin film on parts that enhances the visibility of ultra-fine discontinuities. SKU Pack Size Case Size 2511-0195 Bulk 1kg…
MR®68H is a high temperature solvent & water removable, red & fluorescent colour penetrant for use in Dye-Penetrant Testing for temperatures upto 200 °C . It exhibits outstanding penetrating characteristics which provide maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds and general metal work. SKU Pack Size Case Size 2511-0160 Aerosol 400ml…
MR®70H is a bright white, matte finish, non-halogenated, non-aqueous developer used to enhance the visibility of surface-breaking defects or discontinuities by producing an opaque coating during dye-penetrant inspection for high temperature applications upto 200°C. SKU Pack Size Case Size 2511-0161 Aerosol 400ml 10
MR®91H is a NDT-approved non-halogenated hydrocarbon-based cleaner/remover for pre-cleaning (removes oils, greases and other contaminants) and removing excess surface penetrant from an inspection area before applying developer during during dye-penetrant inspection for high temperature applications upto 200°C. It dries quickly without leaving any residue on the surface. SKU Pack Size Case Size 2511-0162 Aerosol 400ml 10
MR®62 (AMS) is a Type II solvent removable red colour penetrant ideal for general industrial dye penetrant testing. It exhibits outstanding penetrating characteristics along with vivid classic red indications which provides maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds, pressure vessels and general metal works. SKU Pack Size Case Size 2511-0003…
MR®311-R (AMS) is a Type II solvent and water removable red colour penetrant ideal for general industrial dye penetrant testing. It exhibits outstanding penetrating characteristics along with dark red indications which provides maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds, pressure vessels and general metal works. SKU Pack Size Case Size…
MR®311-R (AMS) is a Type II solvent and water removable red colour penetrant ideal for general industrial dye penetrant testing. It exhibits outstanding penetrating characteristics along with dark red indications which provides maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds, pressure vessels and general metal works. SKU Pack Size Case Size…
MR®672F is a oil-free, glycol based solvent & water removable, fluorescent penetrant with a sensitivity Level 2. It exhibits outstanding penetrating characteristics which provide maximum reliability in locating surface open flaws and discontinuities. MR®672F is one of the most versatile fluorescent penetrants and can be used for a wide range of applications and test parts to find different types of…
MR®68NF is a oil-free, glycol based solvent & water removable, red & fluorescent colour penetrant. It exhibits outstanding penetrating characteristics which provide maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds and general metal work. SKU Pack Size Case Size 2511-0004 Aerosol 400ml 10 2511-0043 Bulk 1L 6 2511-0071 Bulk 5L -
MR®67 is a solvent-free solvent & water removable, red & fluorescent colour penetrant. It exhibits outstanding best-in-class penetrating characteristics which provide maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds and general metal work. SKU Pack Size Case Size 2511-0042 Bulk 1L 6 2511-0070 Bulk 5L -
MR®85 is an NDT-approved non-halogenated solvent-based cleaner/remover for pre-cleaning (removes oils, greases and other contaminants) and removing excess surface penetrant from an inspection area before applying developer during liquid penetrant testing. It dries quickly without leaving any residue on the surface. SKU Pack Size Case Size 2511-0006 Aerosol 400ml 10 2511-0048 Bulk 1L 6 2511-0076 Bulk 5L - 2511-0132 Bulk 20L -…
MR®79 is an NDT-approved non-halogenated solvent-based cleaner/remover for pre-cleaning (removes oils, greases and other contaminants) and removing excess surface penetrant from an inspection area before applying developer during liquid penetrant testing. It dries quickly without leaving any residue on the surface. SKU Pack Size Case Size 2511-0008 Aerosol 400ml 10 2511-0047 Bulk 1L 6 2511-0075 Bulk 5L - 2511-0129 Bulk 20L…
MR®70I is a bright white, matte finish, non-halogenated, non-aqueous developer used to enhance the visibility of surface-breaking defects or discontinuities by producing an opaque coating during dye-penetrant inspection. SKU Pack Size Case Size 2511-0007 Aerosol 400ml 10 2511-0046 Bulk 1L 6 2511-0074 Bulk 5L -
MR®70 is a bright white, matte finish, non-halogenated, non-aqueous developer used to enhance the visibility of surface-breaking defects or discontinuities by producing an opaque coating during dye-penetrant inspection. SKU Pack Size Case Size 2511-0006 Aerosol 400ml 10 2511-0045 Bulk 1L 6 2511-0073 Bulk 5L -
MR®81T-R is a non-combustible, light, free flowing dry developer powder that is ideal for highly sensitive fluorescent penetrant processes which can be applied to oven-dried parts following the use of penetrants and forms a thin film on parts that enhances the visibility of ultra-fine discontinuities. SKU Pack Size Case Size 2511-0028 Bulk 1kg -
SMARTCHOICE is an exclusive low-cost edition by MR® Chemie for sale in select channels only. SMARTCHOICE SP10 is a Type II solvent removable red colour penetrant ideal for general industrial dye penetrant testing. It exhibits good penetrating characteristics along with classic red indications which provides optimum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak…
SMARTCHOICE is an exclusive low-cost edition by MR® Chemie for sale in select channels only. SMARTCHOICE WP15 is a Type II water removable red colour penetrant developed for large surface areas and rough surfaces where excess penetrant is difficult to remove using solvent cleaner or emulsifier. This can be used in general industrial dye penetrant testing. It exhibits good penetrating…
SMARTCHOICE is an exclusive low-cost edition by MR® Chemie for sale in select channels only. SMARTCHOICE SC20 is an NDT-approved non-halogenated solvent-based cleaner/remover for pre-cleaning (removes oils, greases and other contaminants) and removing excess surface penetrant from an inspection area before applying developer during liquid penetrant testing. It dries optimally without leaving any residue on the surface. SKU Pack Size Case…
SMARTCHOICE is an exclusive low-cost edition by MR® Chemie for sale in select channels only. SMARTCHOICE SD30 is a bright white, matte finish, non-halogenated, non-aqueous developer used to enhance the visibility of surface-breaking defects or discontinuities by producing an opaque coating during dye-penetrant inspection. SKU Pack Size Case Size 2511-0214 Aerosol 280ml 20 2511-0155 Aerosol 400ml 10 2511-0156 Bulk 1L…
Mildly alkaline, environmentally friendly cleaner with high grease dissolving power Pre-cleaner for penetrant testing according to DIN EN ISO 3452-1 Free of solvents, acid and phosphate pH-value: concentrate 10, 1% dilution 9.5 Contained surfactants are > 90% biodegradable according to the requirements of the RVO to the Detergents and Cleaning Agents Act and the provisions of the Tenside Ordinance (TensVO)…
Remover for penetrant Testing according to EN ISO 3452-1, EN ISO 3452-6 and ASTM E1417 Listed on QPL SAE AMS 2644 (QPL) Class 2 according to AMS 2644 Method C according to EN ISO 3452-2 Alcohol mixture Dries slowly Leaving no residues Less toxicity Free of hydrocarbons Aerosol can is overhead sprayable – 360° Suitable for all metals (suitability for…
MR®312 is an extreme low temperature solvent & water removable, red & fluorescent colour penetrant. It exhibits outstanding penetrating characteristics which provide maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds and general metal work. SKU Pack Size Case Size 2511-0102 Aerosol 400ml 10
Water- and solvent-washable penetrant red Penetrant Type II Sensitivity class 2 according to EN ISO 3452:2 (self-classification) Crack indication red Suitable for all metals, (suitability for plastics and ceramics must be checked before application) Carrier medium glycol ether
Water- and solvent-washable penetrant red Aerosol can without flammable gases Penetrant Type II Sensitivity class 2 according to EN ISO 3452:2 (self-classification) Crack indication red Suitable for all metals, (suitability for plastics and ceramics must be checked before application) Carrier medium glycol ether
Water washable penetrant fluorescent Penetrant Type I acc. ASTM E1417 Penetrant Type I, Method A, Sensitivity level 2 acc. QPL SAE AMS 2644 Crack indication colour yellow and yellow fluorescent Suitable for all metals (suitability for plastics and ceramics must be checked before use) Carrier medium: hydrocarbons
Water washable fluorescent penetrant, type I, acc. to EN ISO 3452-2 and ASTM E1417 Listed on QPL SAE AMS 2644 Level 3 Easy removing Very low background fluorescence High indications performance Free of NPe and Phthalate High biodegradability Good surface wetting Aersol can is overhead sprayable – 360° Suitable for all metals, particularly suitable for aluminium die casting
Water and solvent removable penetrant red and fluorescent Penetrant Type II and Type III Sensitivity level 2 acc. EN ISO3452:2 Crack indication colour „red and fluorescent“ Suitable for all metals (suitability for plastics and ceramics to be checked before application) Carrier medium water
Water and solvent removable penetrant red and fluorescent Penetrant Type II and Type III Sensitivity level 2 acc. EN ISO3452:2 Crack indication colour „red and fluorescent“ Suitable for all metals (suitability for plastics and ceramics to be checked before application) Carrier medium water
Water washable penetrant fluorescent Penetrant Type I Sensitivity level 0.5 acc. EN ISO3452:2 Crack indication colour yellow and yellow fluorescent Suitable for all metals (suitability for plastics and ceramics must be checked before use) Carrier medium Glycol
Water and solvent removable penetrant red and fluorescent Based on mineral oil, contains glycols Suitable for all metals (suitability for plastics and ceramics needs testing prior to use) Without AZO-dye-stuff Suitable for very smooth surfaces Processing temperature -10 °C to +50 °C Aerosol overhead sprayable
Water washable penetrant fluorescent Penetrant Type I Sensitivity level 0.5 acc. EN ISO3452:2 Crack indication colour yellow fluorescent Suitable for all metals (suitability for plastics and ceramics must be checked before use) Carrier medium Glycol
Water washable penetrant fluorescent Penetrant type I Sensitivity class 0.5 according to EN ISO 3452:2 Approved by Volkswagen Crack indication yellow and (UV) yellow fluorescent Suitable for all metals, especially aluminum die casting and silicon aluminum die casting
Water and solvent removable penetrant red and fluorescent Penetrant Type II and Type III Sensitivity level 2 acc. EN ISO3452:2 Carrier medium Mineral-oil & Glycol Crack indication colour „red and fluorescent“ Suitable for all metals, ceramics and very good wetting properties on smooth and polished surfaces
Water washable penetrant fluorescent Penetrant Type I Sensitivity level 0.5 acc. EN ISO3452:2 Crack indication colour yellow and yellow fluorescent Suitable for all metals (suitability for plastics and ceramics must be checked before use) Carrier medium Glycol
Water washable penetrant fluorescent Penetrant Type I Sensitivity level 2 acc. EN ISO 3452:2 SCrack indication colour yellow and yellow fluorescent Suitable for all metals (suitability for plastics and ceramics must be checked before use) Carrier medium Glycol, Ester
Water washable penetrant fluorescent Penetrant Type I Sensitivity level 3 acc. EN ISO 3452:2 Crack indication colour yellow and yellow fluorescent Suitable for all metals (suitability for plastics and ceramics must be checked before use) Carrier medium Glycol, Ester
Pre-cleaner and penetrant remover Colourless Suitable for all metals and ceramics (suitability for plastics must be checked before use) Suitable for all metals (suitability for plastics needs testing prior to use) Carrier medium alcohol
Remover for penetrant Testing according to EN ISO 3452-1, EN ISO 3452-6 and ASTM E1417 Listed on QPL SAE AMS 2644 (QPL) Class 2 according to AMS 2644 Method C according to EN ISO 3452-2 Alcohol mixture Dries slowly Leaving no residues Less toxicity Free of hydrocarbons Aerosol can is overhead sprayable – 360° Suitable for all metals (suitability for…
Developer for penetrant testing acc. to EN ISO 3452:2 Carrier medium solvent Very easy removable from the surface Quick-drying Spray distance of about 20 cm
Water and solvent removable penetrant red and fluorescent Penetrant Type II and Type III Sensitivity level 2 acc. EN ISO3452:2 Crack indication colour „red and fluorescent“ Suitable for all metals (suitability for plastics and ceramics to be checked before application) Carrier medium water
Developer for penetrant testing acc. to EN ISO 3452:2 Carrier medium solvent Very easy removable from the surface Quick-drying Spray distance of about 20 cm
Mildly alkaline, environmentally friendly cleaner with high grease dissolving power Pre-cleaner for the penetration test according to DIN EN ISO 3452-1 Free of solvents, acid and phosphate pH value: concentrate 13.45, 1% dilution 10.30 Contained surfactants are > 90% biodegradable according to the requirements of the RVO to the Detergents and Cleaning Agents Act and the provisions of the Tenside…