ATTBLIME ABX 3D Sublimating Scanning Spray (Upto 2hrs)

ATTBLIME® ABX High Performance Scanning Spray for 3D metrology with the optimized short service life and the matting in perfect white that is visible immediately upon application. Especially suitable for service providers for small to medium-sized components. Also, excellently optimized for the dental industry due to the extremely fine application.

The scanning spray is free of ethanol and adamantane. ABX adheres to all porous and non-porous surfaces such as textiles, wood, glass, painted surfaces, metal, plastic, stone, mortar and paper.

ATTBLIME ABX is ideal for the temporary matting of surfaces for optical 3D measurement technology without subsequent cleaning.

Additional information

Physical Properties

Appearance – Clear liquid
Coated layer Colour – White
Packaging – Aerosol
Odour – Odourless
Type – Sublimating
Pigment – Pigment free
Residue – Residue free
Film Formation – Instant
Coating Thickness – <3 µm
Adherence of reference points on film – Yes

Chemical Properties

Key Ingredient – Mixture of proprietary Sublimating Agent
Basis – Reduced Solvent

Health Protection

Free from titanium dioxide (TiO2), n-hexane and adamantane

Scan Time

Effective Scan Time (EST)*: upto 2 hours^
Sublimation Time (ST)**: 2-4 hours^

*EST is the actual intact duration that the coated layer stays before sublimating.
**ST is the time required for the coated layer to fully sublime.
^Tested at ideal condition. May vary depending on the room temperature, component surface, air circulation & humidity.

Storage

Storage Temperature – 41°F to 113°F / +5 °C to +45 °C
Shelf Life – 5 years

Spray Mechanism

ATTBLIME® SHC

How it Works

A 3D scanning spray, also known as a scanning agent or matting agent, is used to improve the accuracy of 3D scanning systems by creating contrast and highlighting features on the surface of an object. The ATTBLIME® scanning spray contains either a sublimating agent or a non-sublimating agent (free of harmful pigments), which is applied to the surface of the object being scanned. It adheres to the surface and helps to absorb or reflect light in a way that makes it easier for the 3D scanner to detect the shape and contours of the object. When the 3D scanner emits light onto the object, the layer creates a contrasting background that makes it easier for the scanner to identify the edges and details of the object. The scanner then captures multiple images of the object from different angles, which are combined to create a 3D model. The layer also helps to reduce the effect of specular reflection, which occurs when the surface of the object reflects light directly back to the scanner, creating glare and reducing the quality of the scan. The layer diffuses the reflection, making it less intense and improving the accuracy of the scan. Overall, the ATTBLIME® Scanning spray improves the quality and accuracy of 3D scans by creating contrast and reducing glare, making it an important tool for many applications, including industrial inspection, quality control, and reverse engineering.

GHS

Bulk Non Hazardous

FAQ

Q: What is 3D scanning spray? A: 3D scanning spray is a powder-based solution that is used to improve the accuracy and quality of 3D scanning systems. It helps create contrast and highlights features on the surface of an object being scanned, making it easier for the scanner to detect and capture the object's shape and details. Q: What types of surfaces can I use scanning spray on? A: Scanning spray can be used on a variety of surfaces, including smooth or rough, shiny or dark and transparent surfaces. It can be used on all types of substrates such as textiles, wood, glass, painted surfaces, metal, plastic, stone, mortar and paper. However, it is recommended to test a patch for sensitive applications before use. ATTBLIME® offers a variety of products to suit specific application needs. Q: How do I apply scanning spray to an object? A: ATTBLIME® Scanning products can be applied using air-brush, spray gun, aerosols and can be used for both in-line and off-line applications. The product is applied evenly over the surface of the object being scanned, ensuring that it covers all areas of interest. Q: Do I need to clean the object after applying scanning spray? A: It depends on the choice of the Scanning product being used. ATTBLIME® Sublimating product range do not require any post-cleaning. It leaves the surface residue-free post sublimation. However, while using ATTBLIME® Non-Sublimating products, it is recommended to clean the object after scanning to remove any remaining powder. This can be done easily by using a soft cloth or brush and/or a gentle cleaning solution. Q: Can scanning spray damage the object being scanned? A: ATTBLIME® Scanning spray is generally safe to use on most surfaces and does not cause damage. However, it is important to test the spray on a small area first to ensure that it does not react negatively with the material or finish of the object being scanned. Q: How much scanning spray should I use? A: The amount of scanning spray needed will depend on the size and shape of the object being scanned. It is recommended to apply a thin, even layer of powder to the surface of the object, ensuring that all areas of interest are covered. Q: Can I reuse the scanning spray? A: Scanning spray can not be reused. Q: How do I store the scanning Spray? It is recommended to store the products in a cool, dry place and avoid exposure to moisture or humidity. Q: Can I scan an object without using scanning spray? A: It is possible to scan some objects without using scanning spray, especially if they have a matte surface or are well-lit. However, scanning spray can significantly improve the quality and accuracy of the scan, especially for complex or reflective surfaces. Q: Why does my spray evaporate quicker than that mentioned on the product? A: ATTBLIME® Scanning sprays are tested for its sublimating time under ideal conditions and may vary depending on the room temperature, component surface, air circulation & humidity. Q: Why does my spray take longer to evaporate than that mentioned on the product? A: ATTBLIME® Scanning sprays are tested for its sublimating time under ideal conditions and may vary depending on the room temperature, component surface, air circulation & humidity Q: How do I choose an appropriate Scanning Spray? A: ATTBLIME® offers a wide range of scanning spray and systems. You can write to us with your application and basic required and our team of experts can get back to you with a suitable product. Q: Can I order samples of Attblime products? A: Yes, ATTBLIME offers promo boxes for customers to try our products. The promo boxes are available in select countries. Please write to us at sales@3akchemie.com for the same. Q: What is the difference between Effective Scan Time and Sublimation time? A: Effective Scan Time is the actual intact duration that the coated layer stays before sublimating. Sublimation Time is the time required for the coated layer to fully sublime. However, it may vary depending on the room temperature, component surface, air circulation & humidity. Q: What is special about the ATTBLIME® Cyclododecane? A: ATTBLIME® Cyclododecane has a minimum purity of 99.9% and is specially modified to suit the 3D scanning industry. Q: What is ATTBLIME® SHC? A: ATTBLIME® SHC stands for Spray Head Change system is a unique spray mechanism which enables users to choose between vertical ad horizontal, as well as broad and narrow exit angles, to control the film thickness and thus sublimation time.