ASTM-Centrifuge to control the test solution concerning the correct concentration. In the ASTM-centrifuge tube the magnetic powder of the solution deposits in the lower part of the centrifuge after a certain time (as indicated by the manufacturer). The powder share can be read from the number of the graduation lines. Glass Ø = 58 mm includes stand according to ASME…
NSF approved Water washable fluorescent penetrant Penetrant Type I Sensitivity level 1 acc. EN ISO3452:2 Crack indication yellow fluorescent (UV) Suitable for all metals (suitability for plastics and ceramics must be checked before use) Carrier medium - glyceride
MR®81 is a FOOD GRADE, NSF certified non-combustible, light, free flowing dry developer powder that is ideal for highly sensitive fluorescent penetrant processes for food application which can be applied to oven-dried parts following the use of penetrants and forms a thin film on parts that enhances the visibility of ultra-fine discontinuities. SKU Pack Size Case Size 2511-0195 Bulk 1kg…
MR®72 is a specially formulated quick drying coating material which serves to lighten the test surface when performing non-fluorescent magnetic particle inspection by forming a smooth white film to improve probability of detection and sensitivity. Version of MR72 may vary in select countries. SKU Pack Size Case Size 2511-0015 Aerosol 400ml 10 2511-0190 Bulk 1L 6 2511-0189 Bulk 5L -…
MR®76S is a highly sensitive oil-based magnetic particle suspension aerosol which serves to indicate dark, clear, strong background-free cracks when performing coloured magnetic particle inspection. Version of MR®76S may vary in select countries. SKU Pack Size Case Size 2511-0012 Aerosol 400ml 10
MR®76F is a highly sensitive oil-based yellow-green fluorescent magnetic particle suspension aerosol which serves to indicate clear, strong background-free cracks when performing coloured magnetic particle inspection. SKU Pack Size Case Size 2511-0013 Aerosol 400ml 10
MR®111HB is an ECOLINE, ultra bright fluorescent green-yellow (under UV), dry green, highly sensitive ferromagnetic powder designed to be used with oil or water (along with conditioner) which is used for Magnetic Particle Testing (MPT). MR111HB particles are manufactured for an optimum sensitivity, excellent discontinuity definition, brightness with minimal to nil background and magnetic characteristics for wet method fluorescent MPT. It…
MR®114HB is an ultra bright fluorescent green-yellow (under UV), dry green, highly sensitive ferromagnetic powder designed to be used in water which is used for Magnetic Particle Testing (MPT). MR114HB particles is pre-mixed with water conditioner - including corrosion inhibitor, anti-foam and wetting agent; manufactured for an optimum sensitivity, excellent discontinuity definition, brightness with minimal to nil background and magnetic characteristics…
MR®158-R is an ECOLINE, bright fluorescent yellow-green (under UV), dry brown, ultra high sensitive ferromagnetic powder designed to be used with water which is used for Magnetic Particle Testing (MPT) to locate very fine discontinuities in critical parts and applications. MR158-R particles is premixed with water conditioner - including corrosion, anti-foam and wetting agent; manufactured for an optimum sensitivity, excellent discontinuity…
Water-based contrast paint for colored magnetic particle testing Odourless, solvent-free Contains corrosion protection Very good adhesion to all materials High covering power Forms a smooth, white film Ambient temperature of at least +10 °C Drying time depends on application method and working environment
White contrast paint for magnetic particle inspection acc. to EN ISO 9934:1 Carrier medium Solvents Odourless and free of Acetone Very good adhesion to all materials High covering power Forms a smooth, white film
White contrast paint for magnetic particle inspection acc. to EN ISO 9934:1 Carrier medium Solvents Odourless and free of Acetone Very good adhesion to all material High covering power Forms a smooth, white film
White contrast paint for magnetic particle inspection Carrier medium Solvents Odourless and free of Acetone Very easy to remove from the surface No brushing or cleaner necessary Very good adhesion to all materials High covering power Forms a smooth, white film
MR®76SH is a highly sensitive oil-based magnetic particle suspension aerosol which serves to indicate dark, clear, strong background-free cracks when performing coloured magnetic particle inspection for high temperature applications upto +185 °C. SKU Pack Size Case Size 2511-0103 Aerosol 400ml 10
High-boiling isoparaffin with yellow-green fluorescent iron oxide pigments MR® 76 FH Magnetic powder suspension fluorescent, System “Hot” serves to indicate cracks when performing fluorescent magnetic particle inspection, highly sensitive test medium for temperature ranges from 50-185°C Yellow-green fluorescent under UV-light Flash point medium: > 300 °C Medium particle size da = 1-3 µm Sediment: 0,1 – 0,2 ml / 100…
Fluorescent Magnetic Powder Suspension for Magnetic Particle Testing according to EN ISO 9934:1 Carrier medium oil High-brilliance – high fluorescence coefficient, therefore especially suitable for higher area illumination Clear, precise indications especially suitable for rough surfaces Average particle size 8μ Settlement volume (1h) 0,25 – 0,35 ml / 100m Product available on request.
MR®68H is a high temperature solvent & water removable, red & fluorescent colour penetrant for use in Dye-Penetrant Testing for temperatures upto 200 °C . It exhibits outstanding penetrating characteristics which provide maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds and general metal work. SKU Pack Size Case Size 2511-0160 Aerosol 400ml…
MR®765RF is a ready to use visible red (under white light) and bright fluorescent orange (under UV), ferromagnetic powder in aerosol form designed to be used for Magnetic Particle Testing (MPT). MR®765RF particles are manufactured for an optimum sensitivity, excellent discontinuity definition, colour with minimal to nil background and magnetic characteristics for wet method visible MPT. It detects surface and…
MR®70H is a bright white, matte finish, non-halogenated, non-aqueous developer used to enhance the visibility of surface-breaking defects or discontinuities by producing an opaque coating during dye-penetrant inspection for high temperature applications upto 200°C. SKU Pack Size Case Size 2511-0161 Aerosol 400ml 10
MR®91H is a NDT-approved non-halogenated hydrocarbon-based cleaner/remover for pre-cleaning (removes oils, greases and other contaminants) and removing excess surface penetrant from an inspection area before applying developer during during dye-penetrant inspection for high temperature applications upto 200°C. It dries quickly without leaving any residue on the surface. SKU Pack Size Case Size 2511-0162 Aerosol 400ml 10
MR®62 (AMS) is a Type II solvent removable red colour penetrant ideal for general industrial dye penetrant testing. It exhibits outstanding penetrating characteristics along with vivid classic red indications which provides maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds, pressure vessels and general metal works. SKU Pack Size Case Size 2511-0003…
MR®311-R (AMS) is a Type II solvent and water removable red colour penetrant ideal for general industrial dye penetrant testing. It exhibits outstanding penetrating characteristics along with dark red indications which provides maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds, pressure vessels and general metal works. SKU Pack Size Case Size…
MR®311-R (AMS) is a Type II solvent and water removable red colour penetrant ideal for general industrial dye penetrant testing. It exhibits outstanding penetrating characteristics along with dark red indications which provides maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds, pressure vessels and general metal works. SKU Pack Size Case Size…
MR®672F is a oil-free, glycol based solvent & water removable, fluorescent penetrant with a sensitivity Level 2. It exhibits outstanding penetrating characteristics which provide maximum reliability in locating surface open flaws and discontinuities. MR®672F is one of the most versatile fluorescent penetrants and can be used for a wide range of applications and test parts to find different types of…