Skip to content
-
-
-
- ASTM-Centrifuge to control the test solution concerning the correct concentration. In the ASTM-centrifuge tube the magnetic powder of the solution deposits in the lower part of the centrifuge after a certain time (as indicated by the manufacturer). The powder share can be read from the number of the graduation lines. Glass Ø = 58 mm includes stand according to ASME…
- Read more
-
-
-
- NSF approved Water washable fluorescent penetrant Penetrant Type I Sensitivity level 1 acc. EN ISO3452:2 Crack indication yellow fluorescent (UV) Suitable for all metals (suitability for plastics and ceramics must be checked before use) Carrier medium - glyceride
- Read more
-
-
-
- MR®81 is a FOOD GRADE, NSF certified non-combustible, light, free flowing dry developer powder that is ideal for highly sensitive fluorescent penetrant processes for food application which can be applied to oven-dried parts following the use of penetrants and forms a thin film on parts that enhances the visibility of ultra-fine discontinuities. SKU Pack Size Case Size 2511-0195 Bulk 1kg…
- Read more
-
-
-
- MR®72 is a specially formulated quick drying coating material which serves to lighten the test surface when performing non-fluorescent magnetic particle inspection by forming a smooth white film to improve probability of detection and sensitivity. Version of MR72 may vary in select countries. SKU Pack Size Case Size 2511-0015 Aerosol 400ml 10 2511-0190 Bulk 1L 6 2511-0189 Bulk 5L -…
- Read more
-
-
-
- MR®76S is a highly sensitive oil-based magnetic particle suspension aerosol which serves to indicate dark, clear, strong background-free cracks when performing coloured magnetic particle inspection. Version of MR®76S may vary in select countries. SKU Pack Size Case Size 2511-0012 Aerosol 400ml 10
- Read more
-
-
-
- MR®76F is a highly sensitive oil-based yellow-green fluorescent magnetic particle suspension aerosol which serves to indicate clear, strong background-free cracks when performing coloured magnetic particle inspection. SKU Pack Size Case Size 2511-0013 Aerosol 400ml 10
- Read more
-
-
-
- MR®111HB is an ECOLINE, ultra bright fluorescent green-yellow (under UV), dry green, highly sensitive ferromagnetic powder designed to be used with oil or water (along with conditioner) which is used for Magnetic Particle Testing (MPT). MR111HB particles are manufactured for an optimum sensitivity, excellent discontinuity definition, brightness with minimal to nil background and magnetic characteristics for wet method fluorescent MPT. It…
- Read more
-
-
-
- MR®114HB is an ultra bright fluorescent green-yellow (under UV), dry green, highly sensitive ferromagnetic powder designed to be used in water which is used for Magnetic Particle Testing (MPT). MR114HB particles is pre-mixed with water conditioner - including corrosion inhibitor, anti-foam and wetting agent; manufactured for an optimum sensitivity, excellent discontinuity definition, brightness with minimal to nil background and magnetic characteristics…
- Read more
-
-
-
- MR®158-R is an ECOLINE, bright fluorescent yellow-green (under UV), dry brown, ultra high sensitive ferromagnetic powder designed to be used with water which is used for Magnetic Particle Testing (MPT) to locate very fine discontinuities in critical parts and applications. MR158-R particles is premixed with water conditioner - including corrosion, anti-foam and wetting agent; manufactured for an optimum sensitivity, excellent discontinuity…
- Read more
-
-
-
- Water-based contrast paint for colored magnetic particle testing Odourless, solvent-free Contains corrosion protection Very good adhesion to all materials High covering power Forms a smooth, white film Ambient temperature of at least +10 °C Drying time depends on application method and working environment
- Read more
-
-
-
- White contrast paint for magnetic particle inspection acc. to EN ISO 9934:1 Carrier medium Solvents Odourless and free of Acetone Very good adhesion to all materials High covering power Forms a smooth, white film
- Read more
-
-
-
- White contrast paint for magnetic particle inspection acc. to EN ISO 9934:1 Carrier medium Solvents Odourless and free of Acetone Very good adhesion to all material High covering power Forms a smooth, white film
- Read more
-
-
-
- White contrast paint for magnetic particle inspection Carrier medium Solvents Odourless and free of Acetone Very easy to remove from the surface No brushing or cleaner necessary Very good adhesion to all materials High covering power Forms a smooth, white film
- Read more
-
-
-
- MR®76SH is a highly sensitive oil-based magnetic particle suspension aerosol which serves to indicate dark, clear, strong background-free cracks when performing coloured magnetic particle inspection for high temperature applications upto +185 °C. SKU Pack Size Case Size 2511-0103 Aerosol 400ml 10
- Read more
-
-
-
- High-boiling isoparaffin with yellow-green fluorescent iron oxide pigments MR® 76 FH Magnetic powder suspension fluorescent, System “Hot” serves to indicate cracks when performing fluorescent magnetic particle inspection, highly sensitive test medium for temperature ranges from 50-185°C Yellow-green fluorescent under UV-light Flash point medium: > 300 °C Medium particle size da = 1-3 µm Sediment: 0,1 – 0,2 ml / 100…
- Read more
-
-
-
- Fluorescent Magnetic Powder Suspension for Magnetic Particle Testing according to EN ISO 9934:1 Carrier medium oil High-brilliance – high fluorescence coefficient, therefore especially suitable for higher area illumination Clear, precise indications especially suitable for rough surfaces Average particle size 8μ Settlement volume (1h) 0,25 – 0,35 ml / 100m Product available on request.
- Read more
-
-
-
- MR®68H is a high temperature solvent & water removable, red & fluorescent colour penetrant for use in Dye-Penetrant Testing for temperatures upto 200 °C . It exhibits outstanding penetrating characteristics which provide maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds and general metal work. SKU Pack Size Case Size 2511-0160 Aerosol 400ml…
- Read more
-
-
-
- MR®765RF is a ready to use visible red (under white light) and bright fluorescent orange (under UV), ferromagnetic powder in aerosol form designed to be used for Magnetic Particle Testing (MPT). MR®765RF particles are manufactured for an optimum sensitivity, excellent discontinuity definition, colour with minimal to nil background and magnetic characteristics for wet method visible MPT. It detects surface and…
- Read more
-
-
-
- MR®70H is a bright white, matte finish, non-halogenated, non-aqueous developer used to enhance the visibility of surface-breaking defects or discontinuities by producing an opaque coating during dye-penetrant inspection for high temperature applications upto 200°C. SKU Pack Size Case Size 2511-0161 Aerosol 400ml 10
- Read more
-
-
-
- MR®91H is a NDT-approved non-halogenated hydrocarbon-based cleaner/remover for pre-cleaning (removes oils, greases and other contaminants) and removing excess surface penetrant from an inspection area before applying developer during during dye-penetrant inspection for high temperature applications upto 200°C. It dries quickly without leaving any residue on the surface. SKU Pack Size Case Size 2511-0162 Aerosol 400ml 10
- Read more
-
-
-
- MR®62 (AMS) is a Type II solvent removable red colour penetrant ideal for general industrial dye penetrant testing. It exhibits outstanding penetrating characteristics along with vivid classic red indications which provides maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds, pressure vessels and general metal works. SKU Pack Size Case Size 2511-0003…
- Read more
-
-
-
- MR®311-R (AMS) is a Type II solvent and water removable red colour penetrant ideal for general industrial dye penetrant testing. It exhibits outstanding penetrating characteristics along with dark red indications which provides maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds, pressure vessels and general metal works. SKU Pack Size Case Size…
- Read more
-
-
-
- MR®311-R (AMS) is a Type II solvent and water removable red colour penetrant ideal for general industrial dye penetrant testing. It exhibits outstanding penetrating characteristics along with dark red indications which provides maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds, pressure vessels and general metal works. SKU Pack Size Case Size…
- Read more
-
-
-
- MR®672F is a oil-free, glycol based solvent & water removable, fluorescent penetrant with a sensitivity Level 2. It exhibits outstanding penetrating characteristics which provide maximum reliability in locating surface open flaws and discontinuities. MR®672F is one of the most versatile fluorescent penetrants and can be used for a wide range of applications and test parts to find different types of…
- Read more
-
-
-
- MR®68NF is a oil-free, glycol based solvent & water removable, red & fluorescent colour penetrant. It exhibits outstanding penetrating characteristics which provide maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds and general metal work. SKU Pack Size Case Size 2511-0004 Aerosol 400ml 10 2511-0043 Bulk 1L 6 2511-0071 Bulk 5L -
- Read more
-
-
-
- MR®67 is a solvent-free solvent & water removable, red & fluorescent colour penetrant. It exhibits outstanding best-in-class penetrating characteristics which provide maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds and general metal work. SKU Pack Size Case Size 2511-0042 Bulk 1L 6 2511-0070 Bulk 5L -
- Read more
-
-
-
- MR®85 is an NDT-approved non-halogenated solvent-based cleaner/remover for pre-cleaning (removes oils, greases and other contaminants) and removing excess surface penetrant from an inspection area before applying developer during liquid penetrant testing. It dries quickly without leaving any residue on the surface. SKU Pack Size Case Size 2511-0006 Aerosol 400ml 10 2511-0048 Bulk 1L 6 2511-0076 Bulk 5L - 2511-0132 Bulk 20L -…
- Read more
-
-
-
- MR®79 is an NDT-approved non-halogenated solvent-based cleaner/remover for pre-cleaning (removes oils, greases and other contaminants) and removing excess surface penetrant from an inspection area before applying developer during liquid penetrant testing. It dries quickly without leaving any residue on the surface. SKU Pack Size Case Size 2511-0008 Aerosol 400ml 10 2511-0047 Bulk 1L 6 2511-0075 Bulk 5L - 2511-0129 Bulk 20L…
- Read more
-
-
-
- MR®70I is a bright white, matte finish, non-halogenated, non-aqueous developer used to enhance the visibility of surface-breaking defects or discontinuities by producing an opaque coating during dye-penetrant inspection. SKU Pack Size Case Size 2511-0007 Aerosol 400ml 10 2511-0046 Bulk 1L 6 2511-0074 Bulk 5L -
- Read more
-
-
-
- MR®70 is a bright white, matte finish, non-halogenated, non-aqueous developer used to enhance the visibility of surface-breaking defects or discontinuities by producing an opaque coating during dye-penetrant inspection. SKU Pack Size Case Size 2511-0006 Aerosol 400ml 10 2511-0045 Bulk 1L 6 2511-0073 Bulk 5L -
- Read more
-
-
-
- MR®81T-R is a non-combustible, light, free flowing dry developer powder that is ideal for highly sensitive fluorescent penetrant processes which can be applied to oven-dried parts following the use of penetrants and forms a thin film on parts that enhances the visibility of ultra-fine discontinuities. SKU Pack Size Case Size 2511-0028 Bulk 1kg -
- Read more
-
-
-
- SMARTCHOICE is an exclusive low-cost edition by MR® Chemie for sale in select channels only. SMARTCHOICE SP10 is a Type II solvent removable red colour penetrant ideal for general industrial dye penetrant testing. It exhibits good penetrating characteristics along with classic red indications which provides optimum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak…
- Read more
-
-
-
- SMARTCHOICE is an exclusive low-cost edition by MR® Chemie for sale in select channels only. SMARTCHOICE WP15 is a Type II water removable red colour penetrant developed for large surface areas and rough surfaces where excess penetrant is difficult to remove using solvent cleaner or emulsifier. This can be used in general industrial dye penetrant testing. It exhibits good penetrating…
- Read more
-
-
-
- SMARTCHOICE is an exclusive low-cost edition by MR® Chemie for sale in select channels only. SMARTCHOICE SC20 is an NDT-approved non-halogenated solvent-based cleaner/remover for pre-cleaning (removes oils, greases and other contaminants) and removing excess surface penetrant from an inspection area before applying developer during liquid penetrant testing. It dries optimally without leaving any residue on the surface. SKU Pack Size Case…
- Read more
-
-
-
- ASTM-Centrifuge to control the test solution concerning the correct concentration. In the ASTM-centrifuge tube the magnetic powder of the solution deposits in the lower part of the centrifuge after a certain time (as indicated by the manufacturer). The powder share can be read from the number of the graduation lines. Glass Ø = 58 mm includes stand according to ASME…
- Read more
-
-
-
- SMARTCHOICE is an exclusive low-cost edition by MR® Chemie for sale in select channels only. SMARTCHOICE SD30 is a bright white, matte finish, non-halogenated, non-aqueous developer used to enhance the visibility of surface-breaking defects or discontinuities by producing an opaque coating during dye-penetrant inspection. SKU Pack Size Case Size 2511-0214 Aerosol 280ml 20 2511-0155 Aerosol 400ml 10 2511-0156 Bulk 1L…
- Read more
-
-
-
- ASTM-Centrifuge to control the test solution concerning the correct concentration. In the ASTM-centrifuge tube the magnetic powder of the solution deposits in the lower part of the centrifuge after a certain time (as indicated by the manufacturer). The powder share can be read from the number of the graduation lines. Glass Ø = 58 mm includes stand according to ASME…
- Read more
-
-
-
- ATTBLIME® ABX High Performance Scanning Spray for 3D metrology with the optimized short service life and the matting in perfect white that is visible immediately upon application. Especially suitable for service providers for small to medium-sized components. Also, excellently optimized for the dental industry due to the extremely fine application. The scanning spray is free of ethanol and adamantane. ABX adheres…
- Read more
-
-
-
- ATTBLIME® AB ZERO High Performance Scanning Spray for 3D metrology enables the user to achieve an even and homogeneous spray pattern. The newly developed self-volatilizing (sublimating) 3D scanning spray AB ZERO is based on the proven raw material cyclododecane, which has been further optimized. The scanning spray is free from TiO2, n-hexane and adamantane. AB Zero adheres to all porous…
- Read more
-
-
-
- ATTBLIME® AB 2 High Performance Scanning Spray for 3D metrology enables the user to achieve an even and homogeneous spray pattern. The self-volatilizing (sublimating) 3D scanning spray AB 2 is based on the proven raw material cyclododecane, which has been further optimized. The scanning spray is free from TiO2, n-hexane and adamantane. AB 2 adheres to all porous and non-porous…
- Read more
-
-
-
- ATTBLIME® AB6 High Performance Scanning Spray for 3D metrology is the first entrant in the ATTBLIME range and is optimized for medium service life and the matting in perfect white that is visible immediately upon application. Especially suitable for service providers for small to large-sized components. Also, excellently optimized for the dental industry due to the extremely fine application. The…
- Read more
-
-
-
- ATTBLIME® AB24 offers temporary protection for sensitive surfaces when working with water and aqueous solutions, aqueous adhesives or mortars of any kind. This version with a particularly high percentage of cyclododecane allows users in the field of archeology and restoration to preserve objects and paintings as a high-performance sublimating spray. In art, cyclododecane is used as a temporary fixative for…
- Read more
-
-
-
- ATTBLIME® AB 2-G High Performance Scanning Spray for 3D metrology enables the user to achieve an even and homogeneous spray pattern with layer thicknesses of between 3.6 and 9.8 µm, depending on the spray system. The self-volatilizing (sublimating) 3D scanning liquid AB 2-G is based on the proven raw material cyclododecane, which has been further optimized. The scanning spray is…
- Read more
-
-
-
- ATTBLIME® AB6-G High Performance Scanning Spray for 3D metrology is the first entrant in the ATTBLIME range for bulk spraying system and is optimized for medium service life and the matting in perfect white that is visible immediately upon application. It enables the user to achieve an even and homogeneous spray pattern with layer thicknesses of between 3.6 and 9.8…
- Read more
-
-
-
- ATTBLIME AB ECO, the semi-permanent high performance 3D scanning spray, now also in a water-based form. Absolutely label-free! No clumping, excellent high degree of whiteness, fast evaporation and for the extremely fine finish for airbrush systems with a 0.3 mm nozzle. The ATTBLIME AB ECO scanning spray in container form is free of titanium dioxide (TiO2), n-hexane, ethanol and all…
- Read more
-
-
-
- ATTBLIME® ABP enables the user to achieve an even and homogeneous spray pattern with a layer thickness of 5.16 µm. The permanent 3D scanning spray ABP differs significantly from comparable white products like developer, paint, other whiting agents by the newly developed color cooperative grey. This matt gray shade is optimally tailored for use in optical measurement technology and is…
- Read more
-
-
-
- ATTBLIME® ABPW enables the user to achieve an even and homogeneous spray pattern with a layer thickness of 5.16 µm. The permanent 3D scanning spray ABPW has the classic pure white color. The ATTBLIME ABW scanning spray is free of titanium dioxide (TiO2) and ethanol. ABP adheres to all porous and non-porous surfaces such as textiles, wood, glass, painted surfaces,…
- Read more
-
-
-
- ATTBLIME® ABX High Performance Scanning Spray for 3D metrology with the optimized short service life and the matting in perfect white that is visible immediately upon application. Especially suitable for service providers for small to medium-sized components. Also excellently optimized for the dental industry due to the extremely fine application. The sublimating scanning spray is also available as a container for use…
- Read more
-
-
-
- ATTBLIME® ABP-G is the bulk version of ABPW and enables the user to achieve an even and homogeneous spray pattern with a layer thickness of 5.16 µm. The sublimating scanning liquid is available as a container for use with all spray systems such as airbrushes, spray guns or with our mobile ATTBLIME spray systems . A maximum nozzle size of 0.75mm or…
- Read more
-
-
-
- ATTBLIME® ABPW-G is the bulk version of ABPW and enables the user to achieve an even and homogeneous spray pattern with a layer thickness of 5.16 µm. The sublimating scanning liquid is available as a container for use with all spray systems such as airbrushes, spray guns or with our mobile ATTBLIME spray systems . A maximum nozzle size of 0.75mm or…
- Read more
-
-
- Cyclododecane is a cyclic hydrocarbon with the chemical formula C12H24. It has a waxy texture and a mild, pleasant odor. Cyclododecane is commonly used in the fields of art, conservation, and restoration because of its unique properties. In art, cyclododecane is used as a temporary fixative for delicate materials such as pastels, charcoal, and graphite. It can be sprayed (ATTBLIME…
- Read more
-
-
-
- The ATTBLIME Gravity Gun spray system enables the AB6-G, AB2-G and ABP-G containers to be applied to large and small areas. Minimum air consumption 368 l/min Uniform and finest atomization with an application efficiency of at least 65% Precise adjustment of application quantity, jet width round to flat directly on the gun polished aluminum body nozzle and paint needle made…
- Read more
-
-
-
- This ATTBLIME spray system enables the AB6-G, AB2-G and ABP-G containers to be applied to large areas independently of compressed air connections. The system is optimally matched to the ATTBLIME container and convinces with an even and homogeneous surface with minimal material consumption.
- Read more
-
-
-
- The new ATTBLIME® μScan liquid was developed by us for the precise matting of very small reflective or transparent objects in the dental, jewelery or electronics sectors. The liquid agent is applied to the areas to be digitized very precisely with the integrated brush and with a layer thickness of up to 3 µm. In contrast to our scanning sprays,…
- Read more
-
-
-
- Mildly alkaline, environmentally friendly cleaner with high grease dissolving power Pre-cleaner for penetrant testing according to DIN EN ISO 3452-1 Free of solvents, acid and phosphate pH-value: concentrate 10, 1% dilution 9.5 Contained surfactants are > 90% biodegradable according to the requirements of the RVO to the Detergents and Cleaning Agents Act and the provisions of the Tenside Ordinance (TensVO)…
- Read more
-
-
-
- Remover for penetrant Testing according to EN ISO 3452-1, EN ISO 3452-6 and ASTM E1417 Listed on QPL SAE AMS 2644 (QPL) Class 2 according to AMS 2644 Method C according to EN ISO 3452-2 Alcohol mixture Dries slowly Leaving no residues Less toxicity Free of hydrocarbons Aerosol can is overhead sprayable – 360° Suitable for all metals (suitability for…
- Read more
-
-
-
- MR®312 is an extreme low temperature solvent & water removable, red & fluorescent colour penetrant. It exhibits outstanding penetrating characteristics which provide maximum reliability in locating surface open flaws and discontinuities. Typical application include casting, forgings, leak testing, welds and general metal work. SKU Pack Size Case Size 2511-0102 Aerosol 400ml 10
- Read more
-
-
-
- Water- and solvent-washable penetrant red Penetrant Type II Sensitivity class 2 according to EN ISO 3452:2 (self-classification) Crack indication red Suitable for all metals, (suitability for plastics and ceramics must be checked before application) Carrier medium glycol ether
- Read more
-
-
-
- Water- and solvent-washable penetrant red Aerosol can without flammable gases Penetrant Type II Sensitivity class 2 according to EN ISO 3452:2 (self-classification) Crack indication red Suitable for all metals, (suitability for plastics and ceramics must be checked before application) Carrier medium glycol ether
- Read more
-
-
-
- White coating material with special additive Blue fluorescent under UV-light Dries quickly Aerosol overhead sprayable
- Read more
-
-
-
- Water washable penetrant fluorescent Penetrant Type I acc. ASTM E1417 Penetrant Type I, Method A, Sensitivity level 2 acc. QPL SAE AMS 2644 Crack indication colour yellow and yellow fluorescent Suitable for all metals (suitability for plastics and ceramics must be checked before use) Carrier medium: hydrocarbons
- Read more
-
-
-
- Water washable fluorescent penetrant, type I, acc. to EN ISO 3452-2 and ASTM E1417 Listed on QPL SAE AMS 2644 Level 3 Easy removing Very low background fluorescence High indications performance Free of NPe and Phthalate High biodegradability Good surface wetting Aersol can is overhead sprayable – 360° Suitable for all metals, particularly suitable for aluminium die casting
- Read more
-
-
-
- Water and solvent removable penetrant red and fluorescent Penetrant Type II and Type III Sensitivity level 2 acc. EN ISO3452:2 Crack indication colour „red and fluorescent“ Suitable for all metals (suitability for plastics and ceramics to be checked before application) Carrier medium water
- Read more
-
-
-
- Water and solvent removable penetrant red and fluorescent Penetrant Type II and Type III Sensitivity level 2 acc. EN ISO3452:2 Crack indication colour „red and fluorescent“ Suitable for all metals (suitability for plastics and ceramics to be checked before application) Carrier medium water
- Read more
-
-
-
- Water washable penetrant fluorescent Penetrant Type I Sensitivity level 0.5 acc. EN ISO3452:2 Crack indication colour yellow and yellow fluorescent Suitable for all metals (suitability for plastics and ceramics must be checked before use) Carrier medium Glycol
- Read more
-
-
-
- Water and solvent removable penetrant red and fluorescent Based on mineral oil, contains glycols Suitable for all metals (suitability for plastics and ceramics needs testing prior to use) Without AZO-dye-stuff Suitable for very smooth surfaces Processing temperature -10 °C to +50 °C Aerosol overhead sprayable
- Read more
-
-
-
- Water washable penetrant fluorescent Penetrant Type I Sensitivity level 0.5 acc. EN ISO3452:2 Crack indication colour yellow fluorescent Suitable for all metals (suitability for plastics and ceramics must be checked before use) Carrier medium Glycol
- Read more
-
-
-
- Water washable penetrant fluorescent Penetrant type I Sensitivity class 0.5 according to EN ISO 3452:2 Approved by Volkswagen Crack indication yellow and (UV) yellow fluorescent Suitable for all metals, especially aluminum die casting and silicon aluminum die casting
- Read more
-
-
-
- Developer for penetrant testing acc. to EN ISO 3452:2 Type I, II & III Carrier medium: Water Very easy removable from the surface
- Read more
-
-
-
- Water-suspendable developer concentrate for penetrant testing type I, II and III Good suspendability Carrier medium water Easy removability
- Read more
-
-
-
- Water and solvent removable penetrant red and fluorescent Penetrant Type II and Type III Sensitivity level 2 acc. EN ISO3452:2 Carrier medium Mineral-oil & Glycol Crack indication colour „red and fluorescent“ Suitable for all metals, ceramics and very good wetting properties on smooth and polished surfaces
- Read more
-
-
-
- Water washable penetrant fluorescent Penetrant Type I Sensitivity level 0.5 acc. EN ISO3452:2 Crack indication colour yellow and yellow fluorescent Suitable for all metals (suitability for plastics and ceramics must be checked before use) Carrier medium Glycol
- Read more
-
-
-
- Water washable penetrant fluorescent Penetrant Type I Sensitivity level 2 acc. EN ISO 3452:2 SCrack indication colour yellow and yellow fluorescent Suitable for all metals (suitability for plastics and ceramics must be checked before use) Carrier medium Glycol, Ester
- Read more
-
-
-
- Water washable penetrant fluorescent Penetrant Type I Sensitivity level 3 acc. EN ISO 3452:2 Crack indication colour yellow and yellow fluorescent Suitable for all metals (suitability for plastics and ceramics must be checked before use) Carrier medium Glycol, Ester
- Read more
-
-
-
- Product descripiton: Yellow and fluorescent pigment powder for leakage tests on filter equipments in exhaust systems. Properties: Water and moisture resistant Solvent resistant Fluorescent under UV light (365 nm) and at daylight Particle size: 5 – 8 µm Temperature stability: 180°C/5 min. Decomposition: T > 300 °C No declaration of hazardous ingredients – ECO-Line
- Read more
-
-
-
- Product description: Green and fluorescent pigment powder for leakage tests on filter equipments in exhaust systems. Properties: Water and moisture resistant Solvent resistant Fluorescent under UV light (365 nm) and at daylight Particle size: 5 – 8 µm Temperature stability: 180°C/5 min. Decomposition: T > 300 °C No declaration of hazardous ingredients – ECO-Line
- Read more
-
-
-
- Product description: Pink and fluorescent pigment powder for leakage tests on filter equipments in exhaust systems. Properties: Water and moisture resistant Solvent resistant Fluorescent under UV light (365 nm) and at daylight Particle size: 5 – 8 µm Temperature stability: 180°C/5 min. Decomposition: T > 300 °C No declaration of hazardous ingredients – ECO-Line
- Read more
-
-
-
- Product description: MR® 750 Ultrasonic coupling agent with special corrosion inhibitor has been developed for ultrasonic testing in non destructive testing of materials. Product features: water based accoustically exact optimal conducting capacity high viscosity, not dripping with corrosion inhibitor free of fat, silicone and formaldehyde water washable odourless no declaration of hazardous ingredients – ECO-LINE not toxic well tolerated by skin…
- Read more
-
-
-
- gel free of nitrite good miscibility and compatibility with cleaners, antifreezers and surface treatment agents the gel is very suitable for air displacement between probe and surface processing temperature -5 °C to + 50 °C. no declaration of hazardous ingredients – ECO-LINE
- Read more
-
-
-
- MR®110 is an ECOLINE, bright fluorescent yellow-green (under UV), dry brown, ultra high sensitive ferromagnetic powder designed to be used with oil or water (along with conditioner) which is used for Magnetic Particle Testing (MPT) to locate very fine discontinuities in critical parts and applications. MR110 particles are manufactured for an optimum sensitivity, excellent discontinuity definition, brightness with minimal to nil…
- Read more
-
-
-
- General appearance and composition: MR® 755 Special ultrasonic coupling agent with special corrosion inhibitor has been developed for ultrasonic testing in non destructive testing of materials. Advantages: Acoustically exact High viscosity, not dripping Free of formaldehyde Water washable Odourless Not toxic Contact with skin and clothes: indifferent; pH-value approx. 8,0 Processing temperature -20 to +350°C No declaration of hazardous ingredients…
- Read more
-
-
-
- Oil based Suitable for many surfaces Good wettability Neutral odour Aerosol overhead sprayable
- Read more
-
-
-
- Pre-cleaner and penetrant remover Colourless Suitable for all metals and ceramics (suitability for plastics must be checked before use) Suitable for all metals (suitability for plastics needs testing prior to use) Carrier medium alcohol
- Read more
-
-
-
- Remover for penetrant Testing according to EN ISO 3452-1, EN ISO 3452-6 and ASTM E1417 Listed on QPL SAE AMS 2644 (QPL) Class 2 according to AMS 2644 Method C according to EN ISO 3452-2 Alcohol mixture Dries slowly Leaving no residues Less toxicity Free of hydrocarbons Aerosol can is overhead sprayable – 360° Suitable for all metals (suitability for…
- Read more
-
-
-
- Developer for penetrant testing acc. to EN ISO 3452:2 Carrier medium solvent Very easy removable from the surface Quick-drying Spray distance of about 20 cm
- Read more
-
-
-
- Water and solvent removable penetrant red and fluorescent Penetrant Type II and Type III Sensitivity level 2 acc. EN ISO3452:2 Crack indication colour „red and fluorescent“ Suitable for all metals (suitability for plastics and ceramics to be checked before application) Carrier medium water
- Read more
-
-
-
- Developer for penetrant testing acc. to EN ISO 3452:2 Type I, II & III Carrier medium Water Very easy removable from the surface
- Read more
-
-
-
- Developer for penetrant testing acc. to EN ISO 3452:2 Carrier medium solvent Very easy removable from the surface Quick-drying Spray distance of about 20 cm
- Read more
-
-
-
- Leak detector for finding the smallest leaks on all objects under gas or air pressure or with the aid of a vacuum bell jar Forms a transparent film after spraying, which throws bubbles at the leakage points Applicable for checking gas fittings, piping systems, pressure vessels, etc.
- Read more
-
-
-
- Leak detector for finding the smallest leaks on all objects under gas or air pressure or with the aid of a vacuum bell jar Forms a transparent film after spraying, which throws bubbles at the leakage points Applicable for checking gas fittings, piping systems, pressure vessels, etc.
- Read more
-
-
- MR®111 is an ECOLINE, bright fluorescent green-yellow (under UV), dry green, highly sensitive ferromagnetic powder designed to be used with oil or water (along with conditioner) which is used for Magnetic Particle Testing (MPT). MR111 particles are manufactured for an optimum sensitivity, excellent discontinuity definition, brightness with minimal to nil background and magnetic characteristics for wet method fluorescent MPT. It detects…
- Read more
-
-
- MR®112 is an ECOLINE, bright fluorescent green-yellow (under UV), dry green, ultra high sensitive ferromagnetic powder designed to be used with oil or water (along with conditioner) which is used for Magnetic Particle Testing (MPT) to locate very fine discontinuities in critical parts and applications. MR112 particles are manufactured for an optimum sensitivity, excellent discontinuity definition, brightness with minimal to…
- Read more
-
-
- MR®114 is an ultra bright fluorescent green-yellow (under UV), dry green, highly sensitive ferromagnetic powder designed to be used in water which is used for Magnetic Particle Testing (MPT). MR114 particles is pre-mixed with water conditioner - including corrosion inhibitor, anti-foam and wetting agent; manufactured for an optimum sensitivity, excellent discontinuity definition, brightness with minimal to nil background and magnetic characteristics…
- Read more
-
-
- MR®115 is an ultra bright fluorescent green-yellow (under UV), dry green, highly sensitive ferromagnetic powder designed to be used in water which is used for Magnetic Particle Testing (MPT). MR115 particles is pre-mixed with water conditioner - including corrosion inhibitor, anti-foam and wetting agent; manufactured for an optimum sensitivity, excellent discontinuity definition, brightness with minimal to nil background and magnetic characteristics…
- Read more
-
-
- MR®117 is a bright fluorescent green-yellow (under UV), dry green, ultra high sensitive ferromagnetic powder designed to be used with water which is used for Magnetic Particle Testing (MPT) to locate very fine discontinuities in critical parts and applications. MR117 particles is premixed with water conditioner - including corrosion, anti-foam and wetting agent; manufactured for an optimum sensitivity, excellent discontinuity definition,…
- Read more
-
-
- MR®118 is a bright fluorescent yellow-green (under UV), dry brown, ultra high sensitive ferromagnetic powder designed to be used with water which is used for Magnetic Particle Testing (MPT) to locate very fine discontinuities in critical parts and applications. MR118 particles is premixed with water conditioner - including corrosion, anti-foam and wetting agent; manufactured for an optimum sensitivity, excellent discontinuity definition,…
- Read more
-
-
-
- MR®131 is a bright fluorescent yellow-green (under UV) ultra high sensitive ferromagnetic liquid concentrate designed to be used with oil which is used for Magnetic Particle Testing (MPT) to locate very fine discontinuities in critical parts and applications. MR®131 particles is premixed with a special oil conditioner - including added corrosion protection and wetting agent; manufactured for an excellent particle suspension…
- Read more
-
-
-
- MR®153 is a bright fluorescent green-yellow (under UV), green, highly sensitive ferromagnetic liquid concentrate designed to be used in water which is used for Magnetic Particle Testing (MPT). MR153 is pre-mixed with water conditioner - including corrosion inhibitor, anti-foam and wetting agent; manufactured for an optimum sensitivity, excellent discontinuity definition, brightness with minimal to nil background and magnetic characteristics for wet…
- Read more
-
-
-
- MR®210 is an ECOLINE, dry black ferromagnetic powder designed to be used with oil or water (along with conditioner) which is used for Magnetic Particle Testing (MPT). MR210 particles are manufactured for an optimum sensitivity, excellent discontinuity definition, colour with minimal to nil background and magnetic characteristics for wet method visible MPT. It detects surface and slightly sub surface discontinuities…
- Read more
-
-
-
- MR®214 is a dry black ferromagnetic powder designed to be used with water which is used for Magnetic Particle Testing (MPT). MR214 particles is premixed with water conditioner - including corrosion, anti-foam and wetting agent; are manufactured for an optimum sensitivity, excellent discontinuity definition, colour with minimal to nil background and magnetic characteristics for wet method fluorescent MPT. It detects surface…
- Read more
-
-
-
- MR®222 is an ECOLINE, visible red (under white light) and bright fluorescent orange (under UV), dry red ferromagnetic powder designed to be used with oil or water (along with conditioner) which is used for Magnetic Particle Testing (MPT). MR222 particles are manufactured for an optimum sensitivity, excellent discontinuity definition, colour with minimal to nil background and magnetic characteristics for wet…
- Read more
-
-
-
- MR®222LC is an ECOLINE, visible red (under white light) and bright fluorescent orange (under UV), red ferromagnetic liquid cocentrate designed to be used with water which is used for Magnetic Particle Testing (MPT). MR222LC particles is premixed with water conditioner - including corrosion inhibitor, anti-foam and wetting agent; manufactured for an optimum sensitivity, excellent discontinuity definition, colour with minimal to…
- Read more
-
-
-
- MR®230 is a highly refined red ferromagnetic powder that provides strong contrast on most metal surfaces during dry method magnetic particle testing in visible light. It is ready-to-use for visible light flaw detection of surface and slightly subsurface discontinuities in ferrous metals. It can be used in a powder blower or shaken from a bottle during magnetization, and blown off…
- Read more
-
-
-
- MR®231 is a highly refined grey ferromagnetic powder that provides strong contrast on most metal surfaces during dry method magnetic particle testing in visible light. It is ready-to-use for visible light flaw detection of surface and slightly subsurface discontinuities in ferrous metals. It can be used in a powder blower or shaken from a bottle during magnetization, and blown off…
- Read more
-
-
-
- MR®232 is a highly refined green ferromagnetic powder that provides strong contrast on most metal surfaces during dry method magnetic particle testing in visible light. It is ready-to-use for visible light flaw detection of surface and slightly subsurface discontinuities in ferrous metals. It can be used in a powder blower or shaken from a bottle during magnetization, and blown off…
- Read more
-
-
-
- MR®233 is a highly refined yellow ferromagnetic powder that provides strong contrast on most metal surfaces during dry method magnetic particle testing in visible light. It is ready-to-use for visible light flaw detection of surface and slightly subsurface discontinuities in ferrous metals. It can be used in a powder blower or shaken from a bottle during magnetization, and blown off…
- Read more
-
-
-
- MR®234 is a highly refined blue ferromagnetic powder that provides strong contrast on most metal surfaces during dry method magnetic particle testing in visible light. It is ready-to-use for visible light flaw detection of surface and slightly subsurface discontinuities in ferrous metals. It can be used in a powder blower or shaken from a bottle during magnetization, and blown off…
- Read more
-
-
-
- MR®82 is a no-odour, very high flash point - petroleum-based high-purity NDT-approved suspension vehicle specifically for wet method magnetic particle testing and is compatible with all the MR® range of Magnetic powders. It provides excellent particle mobility, good suspension stability and enhanced corrosion protection for reliable, spec-compliant magnetic particle testing. SKU Pack Size Case Size 2511-0063 Bulk 25L - 2511-0061 Bulk…
- Read more
-
-
-
- Carrier liquid for fluorescent and coloured Magnetic Particle Inspection with oil suspendable MR® magnetic powders, according to EN ISO 9934-1 No declaration of hazardous ingredients according to CLP regulation (EC) no. 1272/2008 – ECO-LINE Available on request only!
- Read more
-
-
-
- Mildly alkaline, environmentally friendly cleaner with high grease dissolving power Pre-cleaner for the penetration test according to DIN EN ISO 3452-1 Free of solvents, acid and phosphate pH value: concentrate 13.45, 1% dilution 10.30 Contained surfactants are > 90% biodegradable according to the requirements of the RVO to the Detergents and Cleaning Agents Act and the provisions of the Tenside…
- Read more
-
-
-
- Aqueous, temporary corrosion inhibitor Concentrate 0,5-4% For the preparation of aqueous magnetic powder suspensions for increasing the corrosion protection Does not contain secondary amines, but only primary and tertiary amines, which cannot form nitrosamines Foam-free No declaration of hazardous ingredients – ECO-LINE Particularly suitable for the following magnetic particle concentrates: ▪ MR® 158 ▪ MR® 158-R ▪ MR® 153 ▪ …
- Read more
-
-
-
- MR®304 is a general-purpose blend of wetting agents, corrosion inhibitors and anti-forming agents water-conditioning powder to enhance surface wetting and magnetic particle dispersion stability in water-based magnetic particle suspensions. It is added to the water bath and mixed until dissolved prior to addition of magnetic powder (oil & water based). SKU Pack Size Case Size 2511-0039 Bulk 1 kg 6…
- Read more
-
-
-
- MR® 400 Wetting agent serves for the diminishing of surface tension of aqueous magnetic powder suspensions which improves the wettability of the surface to be tested MR® 400 Wetting agent is a clear liquid which is mixable with water according to the customer´s needs No declaration of hazardous ingredients – ECO-LINE
- Read more
-
-
-
- Emulsion of low viscosity Additive for the diminishing of foam formation when preparing aqueous magnetic powder suspensions No declaration of hazardous ingredients – ECO-LINE
- Read more
-
-
- MR®913 is a highly concentrated oil/solvent soluble dye containing a fluorescent dye in a high flash hydrotreated naphthenic solvent system used for leak detection in oil-based systems and has a wide application. The product is a transparent/yellow coloured liquid and has been found to be completely miscible in most petroleum or organic based products. SKU Pack Size Case Size 2511-0086…
- Read more
-
-
- MR®913 is a highly concentrated oil/solvent soluble dye containing a fluorescent dye in a high flash hydrotreated naphthenic solvent system used for leak detection in oil-based systems and has a wide application. The product is a yellow coloured liquid and has been found to be completely miscible in most petroleum or organic based products. SKU Pack Size Case Size 2511-0087…
- Read more
-
-
- MR®913 is a highly concentrated oil/solvent soluble dye containing a fluorescent dye in a high flash hydrotreated naphthenic solvent system used for leak detection in oil-based systems and has a wide application. The product is a dark colored liquid and has been found to be completely miscible in most petroleum or organic based products. SKU Pack Size Case Size 2511-0040…
- Read more
-
-
-
- Today we would like to introduce our latest development to you: The MR®756 coupling agent powder for self-mixing coupling gel for ultrasonic testing. Mix only the amount you really need for your test. The high-yield concentrate (sufficient for 5L of ready-to-use coupling agent) significantly reduces transportation costs and volume, making it ideal for carry-on or shipping. Simply mix the required…
- Read more
-
-
-
- Two-component special coating based on an acrylic resin, consisting of pigmented components:: RILUMINATI 815 Indicator layer fluorescent RILUMINATI 816 Top coat black
- Read more
